Why ordinary lighting is not enough in a dental laboratory
Good visual conditions in a dental laboratory require high illuminance levels. Workplace Directive ASR 7/3 and DIN 67505 specify 1,000 to 1,500 lux for laboratory workstations. Conventional ceiling lights rarely reach this level at the workstation, and when they do, often at the cost of severe glare. An adjustable-height pendant or articulated light solves this problem, allowing the dental technician to position it for high brightness without direct glare.
Requirements for good lighting in dental technology
Illuminance
At least 2,000 to 3,000 lux on the workpiece, with directional supplementary lighting if needed.
Brightness distribution
A bright work area against a less bright surrounding area. Adjacent surfaces should be no more than one third as bright as the work area. Walls with low luminance provide resting areas for the eyes when looking up.
Glare control
Glare is the most common cause of vision discomfort related to lighting, and sensitivity increases with age. Shielded lights, such as those with mirror louvres to reduce glare, prevent distracting reflections on the work surface.
Light direction and contrast
Directional light creates shadows, which make contours, depth and texture visible. This is essential for assessing surfaces.
Light color and color rendering
A high CRI of 90 is important for shade matching teeth, ceramics and veneers. Lights with two individually switchable lamps of different light colors make it possible to recreate various lighting conditions that patients will experience in everyday life. Recommended light colors are 4,000 to 5,000 Kelvin, with daylight at 5,500 to 6,500 Kelvin.
Visual comfort and heat
Open lights from the DIALITE series dissipate heat from the lamps through openings on the top, preventing heat from building up at the workstation. Flicker-free high-frequency operation provides steady, flicker-free light and reduces eye strain.
Quality criteria at a glance
Strong, wide-area lighting of at least 2,000 to 3,000 lux, with directional supplementary lighting if needed
Light colors from 4,000 to 5,000 Kelvin, daylight from 5,500 to 6,500 Kelvin, CRI 95 color rendering for shade matching, veneering and final inspection, glare-free and flicker-free light without stroboscopic effects
Balanced luminance distribution
Our recommendations
The following lights meet these quality criteria and are among the models most frequently chosen by our dental technology customers.


